Industrial IoT Gateway

Industrial IoT Gateway

Product Brief

Gateway designed to support industrial application in the loT spectrum acts as an interface bridge between the edge/remote devices/nodes and the cloud. In other words, it collects the data from the edge nodes/devices and process to the possible extent and send it to the cloud platform. Also, the gateway device is equipped with optional sensors to monitor the environmental aspects of the remote location where it is installed. Specifications, supported sensors, protocols and interfaces listed below. This gateway is running with a proprietary framework called Common Communication and Control Framework – C3FT° which will take care of the key functional aspects of an loT gateway such as Security, Device management, Cloud communication and ability to adopt wide range of downstream medias such s BLE, MODBUS, RFID etc, various network adaptors like WiFi, Ethernet and Cellular modems. Provision to develop highly scalable edge processing engines.
PARAMETER DESCRIPTION
Power Supply
  • 5VDC ± 5% through micro-USB or DC Power Jack
  • Power Over Ethernet – IEEE802.3at support
System

Configuration

CPU • 32-bit ARM Cortex-A8@1GHz Memory
Memory • Upto 1 GB DDR3L
Storage • Onboard 4GB eMMC
System I/O

interface ports

• 1 x micro-SD connector

• 1 x RJ45 port with magnetics

• 2 x USB 2.0 host ports

• 4 x U.FL male connectors

• 1 x micro-USB female connector

• 2 x 3 POS terminal block connectors

Connectivity Ethernet • 10/100 Base-T PHY chip

• Supports up to 100Mbps speed

• 1 x RJ45 port with magnetics

Bluetooth • 2 x BLE on-board radios (Optional)

• BLE 4.2

• 2 x U.FL connectors for interlacing antenna

Serial • 1 x RS232 or 1 x RS485

• RS-232 Signal: TXD, RXD, GND

• RS-485 Signal: A, B, GND

• ESD Protection 12kV

LED indications • 1 x Power indication

• 2 x User programmable Protocols

Protocols • TCP/IP, Bluetooth, MQTT, Rest APIs, Modbus RTU

Sensor Specifications(On-board & Optional)

The device has a provision for onboard sensors. Their technical details are captured in the below table.

SENSOR MEASURED SENSOR PARAMETERS RANGE RESOLUTION/ACCURACY
Motion Sensor Acceleration ±2g, ±4g, ±8g, ±16g 16-bit resolution
Gyroscope 125o/s, 250o/s, 500o/s,

1000o/s, 2000o/s

16-bit resolution
Geomagnetic sensor Magnetic field ±1300pT (x,y axis),

±2500pT (z-axis)

Magnetic field resolution

-0.3pT

Barometric sensor with integrated

temperature sensor

Absolute Pressure 0 – 1200 mbar 24-bit resolution

Accuracy:

±1.5 mbar(25oC, 750 mbar)

±2.5 mbar(-20oC to 85°C,

300 to 1100 mbar)

Temperature -40 to +85 °C <0.01 oC resolution

Accuracy: ±0.8oC

Humidity sensor with integrated

temperature sensor

Relative Humidity 0 to 100 %RH <0.2 %RH RMS resolution

Accuracy:

±2%RH(0 to 80 %RH)

Temperature -40 to +85 °C <0.08 oC RMS resolution

Accuracy:

±0.3oC(-10oC to +85oC)

Ambient Light Sensor Light 0.01 to 83000 lux 23-bit resolution

Max. sensitivity at 550 nm

Application

The Gateway can be used to relay messages between the edge devices and the Cloudplatform in asset monitoring and tracking applications

Industrial loT Applications